浸滲工藝流程
- 分類：浸滲工藝
- 發布時間：2022-01-11 19:57:29
- 訪問量：0
浸滲整個流程圖Permeate the entire flow chart
浸滲工藝Impregnation process
工件浸滲工藝分為前處理、浸滲處理和后處理三個階段。Workpiece infiltration technology is divided into three stages: pre-treatment, infiltration treatment and post-treatment.
一．前處理one Before processing
前處理工藝包括脫脂 清洗 和真空干燥等工序The pretreatment process includes degreasing cleaning and vacuum drying
1.1 超聲波脫脂示意圖Schematic diagram of ultrasonic degreasing
1.2 熱水漂洗示意圖Schematic of hot water rinse
1. 3. 真空干燥Vacuum drying
二．浸滲處理Impregnation process
浸滲處理工藝包含真空浸滲，六向脫液，翻轉清洗，翻轉固化等工序The infiltration process includes vacuum infiltration, six-way dewatering, flip cleaning, flip curing and other processes
2.1 真空浸滲Vacuum impregnation
2.六向脫液Six to take off the liquid
3.翻轉清洗ⅠTurn cleaning Ⅰ
4.翻轉清洗ⅡTurn over cleaning ⅱ
5.翻轉熱水固化Flip hot water curing
三．后處理 Aftertreatment
浸滲處理后工件應進行壓力試驗，如有泄露可進行第二、第三次浸滲處理，對三次浸滲后仍泄露的工件則作報廢處理。
The workpiece should be subjected to pressure test after leaching treatment. If there is leakage, the second and third leaching treatment can be carried out. The workpiece that still leaks after three leaching is scrapped.
具體詳細的浸滲工藝請聯系我司咨詢Please contact us for detailed infiltration process
本司將致力于不斷的改進產品生產工藝和品質，并且不斷的發展新的產品去保持市場的競爭能力。正朝著現代企業的方向與時間一同前進。以“真誠、務實、優質、高效”為企業宗旨，竭誠為各界人士服務。
The company will continue to improve the production process and quality of products, and continue to develop new products to maintain market competitiveness. Is moving in the direction of the modern enterprise with time. "Sincere, pragmatic, high quality, efficient" for the purpose of the enterprise, dedicated to serve people from all walks of life.
頭尾
? 2022 臺州亨旭浸滲設備有限公司 Taizhou Hengxu Infiltration Equipment Co.,Ltd. 浙ICP備2022002778號 網站建設：中企動力 臺州